This exceedingly handy timer which we are able to offer courtesy of its creator Tom Goodrick is just what you need for recording the overall flight time for each World Rally flight.

Unzip the FTimeV3.zip file to a location of your choice and follow Tom's instructions.

For how to find a position on your panel follow the explanation written below by Johan van Wyk. This will help to find a position on your panel where you wish to locate the timer....

To find the coordinates to place the timer (gauge) on your panel, look for the main bmp of the panel in your aircraft's Panel folder; it should be the largest one called, "*main.bmp" or "*background.bmp". Open it with Paint, move your mouse pointer to the left-hand upper corner of where you want the gauge installed and read off the coordinates at the right-hand bottom bar of the Paint program.

Use this coordinates in the panel.cfg file.
...............................................................................................................

Alternatively you may add the timer to the panel.cfg for the DC-3 you are using for the rally with these suggested lines...
MAAM DC-3 ...
gaugexx=Digital!FTime,  116,412,56,42
Where 'xx' is the next gauge on the Pilot's panel (Window00)

Microsoft Default DC-3 ...
gaugexx=Digital!FTime,  8,400,56,42
Where 'xx' is the next gauge on the Pilot's panel (Window00)
